Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterTrusted Garage Door Repair for Tempe Homeowners
A garage door that won’t open in Tempe isn’t a small problem. Not when it’s 108 degrees outside and your car is trapped inside, or when the door is stuck three feet up and the whole street can see into your garage. Garage door repair in Tempe typically costs $150-$600 depending on what failed, and most repairs are completed the same day the technician arrives. Servo Garage Doors has made more than 18,000 doors right since 2015, and every single one started with a written price before any work began. If your door is down or stuck right now, call (602) 962-8352 and a real person answers, day or night.
We’re the company that photographs the failed component before quoting a replacement. That rule traces back to what Servo was built on in 2015: you see the broken part with your own eyes before a dollar figure changes hands. Marcus Deller runs our Tempe operation, and he’s held that line on every job we’ve done in this city. No exceptions, no fine print, no “trust us.” You get the evidence, then you get the price, then you decide.
What Our Garage Door Repair Service Includes
Every service call starts the same way: the technician inspects the full system, photographs what he finds, and shows you the failed component before quoting anything. Here’s what that looks like for each repair we handle in Tempe.
Panel Replacement
A dented or cracked panel isn’t cosmetic once you understand how a sectional door distributes weight. If one panel is compromised, the entire door can bind as it travels on the track, which puts strain on every other component. Panel Replacement in Tempe runs $250-$500 and involves matching the panel profile and finish to the existing door. We order from the manufacturer when possible and document the damage with photos before you commit to a dollar amount.
Spring Repair
The torsion spring is the counterweight system mounted above the door opening. It does the heavy lifting so the opener motor doesn’t have to. When it breaks, you hear it, often a loud bang from the garage, and the door becomes nearly impossible to lift by hand. Spring repair in Tempe runs $180-$340, and we carry multiple spring sizes on our trucks to match the door’s weight and cycle rating. We never patch a broken spring; we replace it with one rated for the correct number of cycles.
One thing we want every Tempe homeowner to understand: torsion springs are under extreme tension. The repair is not a DIY job. We’ve seen the injuries that can happen when a spring lets go, and we will not give you a step-by-step on doing it yourself. Call (602) 962-8352 and let a trained technician handle it.
Cable Repair
Cables work in tandem with the springs. They run along both sides of the door and bear the load as the door rises and lowers. A frayed cable can snap without warning, and if it does, the door can drop hard and unevenly. Cable Repair in Tempe runs $130-$250, and we replace both cables even when only one shows wear. If one is failing, the other has been through the same cycles. We check cable drums, pulley bearings, and the cable-to-door attachment point on every cable job.
Track Realignment
The tracks are the steel channels bolted to the wall and ceiling that guide the door rollers. Over time, in Tempe’s heat, the hardware can loosen, or a bump from a car can knock a section out of alignment. A track that’s off by even a quarter inch causes the door to shake, bind, or reverse mid-cycle. Track realignment in Tempe runs $120-$240 and involves checking the level and plumb of both tracks, tightening all mounting hardware, and adjusting the track brackets so the door travels true. It’s the repair your door needs when the problem isn’t the opener, the springs, or the panels, but the geometry itself.
Roller Replacement
Rollers are the small wheels that carry the door along the track. Most doors have ten or twelve of them, and they wear out quietly. You might hear more noise than usual, or see the door wobble slightly as it moves. Roller Replacement in Tempe runs $110-$220 depending on the roller type, nylon or steel, and whether they have sealed bearings. We replace them in sets, never one at a time, because mixing worn and new rollers just shifts the problem to another point on the door. On most doors this is a quick repair, often under an hour.
Sensor Calibration
Photo-eye sensors sit near the floor on either side of the opening. They project an invisible beam, and if anything breaks it, the door won’t close, this is the safety reverse system at work. When they’re misaligned, dirty, or failing, the door reverses for no visible reason, or the opener blinks and refuses to respond. Sensor Calibration in Tempe means aligning the beam, cleaning the lenses, verifying the wiring to the opener’s logic board, and testing the door’s reversal force. It’s one of the least expensive fixes we perform, and one of the most common calls we get from Tempe homeowners who think their opener has failed when it’s actually just a sensor that’s been knocked out of line.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Garage Door Repair
We service all eight major residential brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That matters because parts are not universal. A LiftMaster logic board won’t fit a Genie opener, and a Wayne Dalton torsion system is engineered differently from a Clopay setup. The technician who shows up at your door needs to know which system he’s working on before he opens his tool bag.
We carry OEM and OEM-equivalent parts for Wayne Dalton, Craftsman, and Raynor on our Tempe trucks because those three brands account for a large share of what we see in the area. Wayne Dalton doors use a proprietary TorqueMaster spring system on many models, and you can’t put a standard torsion spring on it without a conversion kit, something a lot of repair companies miss. Craftsman openers are among the most common we see from the pre-2015 build era in Tempe’s older neighborhoods. Raynor builds a heavier door than most, and that weight changes what rollers and spring cycle ratings should be used. If you have one of these brands or any other make, we can repair it, and we’ll show you the evidence before you pay for anything.
BeforeAfterSigns You Need Garage Door Repair Right Now
- The door is louder than it was a month ago. Noise is the earliest warning sign a garage door gives. Grinding, squealing, or popping usually points to worn rollers, a dry bearing, or a spring that’s beginning to fail. The sound will get worse, and the repair will get more expensive. When a Tempe homeowner calls and says the door “sounds angry,” we find the source on the same visit.
- The door hesitates or reverses mid-cycle. If your door starts down, stops, and goes back up, that’s often the sensors or the limit switch on the opener. If it starts up and then struggles, the springs may be under-sprung for the door’s weight. Both are repairable, and both are signs that something is about to fail completely. Do not keep overriding the opener; that’s how doors come off their tracks.
- One side of the door sits higher than the other. An unbalanced door is a cable, spring, or track problem, and it puts uneven wear on every moving part. If the door doesn’t stay in place when you disconnect the opener and lift it manually, the counterbalance system has failed. Call (602) 962-8352 before the uneven load causes a cable snap or a panel bend.
- The door is down and will not move, even manually. A door that won’t budge by hand tells us the spring or cable tension is holding it, and that’s a safety release issue, not an inconvenience. Do not force it. Forcing a door with a loaded spring can cause serious injury. This is a call to make immediately, and we answer live 24 hours a day.
- You see visible wear on the cables, springs, or hardware. Frayed cable strands, gaps in a spring coil, rust at the mounting points, loose bolts at the track brackets. These are the things we look for on every visit, and they’re the things you should look at too. If you can see the wear before we arrive, you’ll be able to see the fix after, because we photograph everything.
Our Garage Door Repair Process - Step by Step
We built our process around a simple idea: you should know exactly what’s wrong and exactly what it costs before you say yes to anything. Here’s how every repair works with Servo Garage Doors in Tempe.
- 1
Call and talk to a person, not a recording. Live phone coverage runs 24 hours a day, every day, including holidays like the Fourth of July when garage doors in Tempe seem to fail the most. You’ll get a named technician and an on-the-way text, not a four-hour callback window. Tell us what the door is doing and we’ll come prepared for the likely cause.
- 2
On-site inspection with photographic evidence. The technician checks the door, the springs, the cables, the tracks, the rollers, the sensors, and the opener. Everything that shows wear gets photographed. Then he walks you through what he found. Clause 4 of The Haven Standard is why the technician photographs the failed part before quoting a replacement, and it’s why you won’t be asked to take anyone’s word for it.
- 3
A flat written price and written scope before any work starts. Not an estimate. Not a ballpark. Clause 1 of The Haven Standard requires a flat, written price and a written scope of work before the technician touches a wrench. You’ll know the dollar figure and you’ll know exactly what it covers. If the scope changes for any reason, the price change is documented and approved by you before anything else happens.
- 4
The repair, done with the right parts. We use OEM or OEM-equivalent components matched to your door’s make, model, weight, and cycle requirements. No generic parts, no shortcuts, no “we’ll patch it and hope it holds.” The technician works until the door opens and closes smoothly, quietly, and safely, and then runs the full cycle test.
- 5
Documented photo record handed to you before we leave. You’ll see the failed component, the new part, the work as it was completed, and the door in operation. Every job ends with a documented record of findings and completed work delivered to you. That’s the paper trail, and it’s included on every visit, no upsell, no extra charge. The 365-Day Done Right Promise is what stands behind it: if the repair isn’t right, we make it right.
How Much Does Garage Door Repair Cost in Tempe?
Garage door repair in Tempe typically runs $150-$600. The range is broad because “repair” can mean a fifteen-minute sensor realignment or a full afternoon involving springs, cables, and a derailed door. Here’s what we quote on the page, in dollars, because “call for a quote” contradicts everything we do.
Tempe Garage Door Repair Price Ranges
- Spring repair: $180-$340, depending on spring size, cycle rating, and whether it’s a torsion or extension system.
- Cable repair: $130-$250, including both cables and hardware inspection.
- Panel replacement: $250-$500, depending on panel profile, insulation, and finish matching.
- Track realignment: $120-$240, including bracket adjustment and hardware tightening.
- Roller replacement: $110-$220, depending on roller type and quantity.
- Sensor calibration: typically at the low end of the repair range, often $120-$180 depending on wiring and bracket condition.
- Opener repair: $120-$320, depending on whether it’s the logic board, the trolley carriage, the limit switch, or the motor itself.
What moves the price: the door’s weight and design, the age and condition of related components, whether the parts are proprietary to a specific brand, and whether multiple failures happened at once. A door that snapped a spring may also have thrown a cable, and that’s a different scope than a spring alone. What doesn’t move the price: how nice your house looks, what zip code you’re in, or whether you sound like you’re in a hurry. We quote the job, not the customer. Every free estimate includes the full inspection, the photo documentation, and the written price before anything is done. If another company has given you a written estimate, bring the paperwork. We’ll do a free second opinion on it, no coupon required.
Three things protect you from overpaying for garage door repair in Tempe. First, get the price in writing before any work starts, and don’t accept a verbal ballpark as a substitute. Second, ask to see the failed part. If the technician won’t show you, ask why. Third, get a scope that names the parts and labor separately, so you can compare apples to apples. We do all three as standard practice, not as a favor.
Garage Door Repair Near Tempe - Our Service Area
We repair garage doors across Tempe, from the neighborhoods around Kiwanis Park to the Mitchell Park West area, the Lakes community, and down toward the I-10 corridor. We also serve Guadalupe just across the border, Chandler to the south, and the wider East Valley including Mesa, Gilbert, Sun Lakes, and Queen Creek. Phoenix, Glendale, Fountain Hills, Tolleson, and Paradise Valley are all within our service area as well. Typical response for non-emergency calls in Tempe is same day or next morning. Emergency calls get a technician dispatched immediately, with a live person on the phone from the first ring. If you’re in Tempe or a neighboring city and your door has failed, garage door repair in Tempe is what we do every day. You can also start from our home page to see the full scope of what we offer.
Serving Tempe, AZ - Our Local Coverage Area
We’re based in the Tempe area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Garage Door Repair in Tempe
Garage door repair covers the diagnosis and correction of any failure in the door’s operating system: springs, cables, tracks, rollers, panels, sensors, hinges, and the opener itself. Most Tempe homeowners call us when the door stops working, makes noise, or moves unevenly, and the fix involves replacing or recalibrating the specific component that failed. We photograph the failed component, quote a flat written price, and complete the repair the same day whenever parts are on the truck.
Most repairs in Tempe are completed in 45 to 90 minutes after the technician arrives. Sensor calibration and roller replacement are typically under an hour. Spring or cable repairs run an hour to an hour and a half, and a panel replacement with finish matching can take longer. We’ll tell you the expected time when the technician gives you the written scope, and the documented record is handed to you before we leave.
Garage door repair in Tempe typically costs between $150 and $600. The exact figure depends on the component, the door’s weight and design, and whether multiple parts failed at once. We provide the exact written price after the on-site inspection and before any work begins, and that price does not change. Call (602) 962-8352 to schedule, and the estimate is free.
Yes. We repair Wayne Dalton doors regularly, including models with the proprietary TorqueMaster spring system. The TorqueMaster setup is different from a standard torsion spring, and it requires specific parts and a technician who knows the difference. We carry Wayne Dalton OEM and OEM-equivalent parts on our Tempe trucks and can also convert a TorqueMaster system to a standard torsion spring when that’s the better long-term fix.
In most Tempe cases, yes. Emergency calls get a technician dispatched immediately, with a live person on the phone when you call. Non-emergency calls are typically scheduled same day or the next morning. When you call (602) 962-8352, you’ll get a named technician and an on-the-way text, not a callback window. Tell us what the door is doing and we’ll come prepared.
Every repair we do is covered by our 365-Day Done Right Promise. If the repair isn’t right, we make it right. The specific parts warranty depends on the component and manufacturer, and it’ll be documented in your written scope. The guarantee is backed by The Haven Standard and our terms page, not a handshake. You’ll have it in writing before we start the work.
Clear the area around the door inside the garage, about six feet back from the opening, and make sure there’s a clear path to the opener unit. If you have a remote or keypad, have it accessible so we can test the full system after the repair. Move vehicles out of the garage if the door won’t open. That’s all. We’ll handle everything else, and we’ll leave you with the photo record when we’re done.
Schedule Your Garage Door Repair Service in Tempe Today
If your garage door is down, stuck, noisy, or not moving right, don’t wait until it fails completely in the middle of a Tempe summer morning. Call (602) 962-8352 right now and talk to a real person. We’ll get a technician dispatched, show you the failed component with photographs, hand you a flat written price before any work begins, and complete the repair the same day whenever parts allow. The estimate is free, the documentation is included, and the work is covered by the 365-Day Done Right Promise. Garage Door Repair in Tempe is available 24 hours a day, 7 days a week for emergencies.
Written by Marcus Deller, Owner at Servo Garage Doors Tempe, serving Tempe since 2015.