Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterTrusted Garage Door Installation for Tempe Homeowners
A new our Garage Door Installation in Tempe runs between $700 and $2,200 for most homes, depending on the door size, material, and whether you’re replacing the opener at the same time. Servo Garage Doors Tempe has installed garage doors across Tempe since 2015, and every job has started the same way: a written price and a written scope, agreed before any work begins.
We’re the company that photographs the failed component before quoting a replacement. That rule has been with us since the beginning and is now written into Clause 4 of The Haven Standard. If your existing door has a cracked panel, a bent track, or a torsion spring that let go in the middle of a Phoenix summer, you’ll see the evidence before we quote the fix or the replacement. Call (602) 962-8352 and a live person answers, 24 hours a day, including holidays.
Marcus Deller runs the operation here in Tempe. Our technicians are background-checked, uniformed, and carry the license number on the vehicle, not buried in a drawer somewhere. If you’re in Tempe, Guadalupe, Chandler, or anywhere in the East Valley, we can get a technician to your door with a written quote in hand.
What Our Garage Door Installation Service Includes
Garage door installation is not a one-size-fits-all job. We measure the opening, check the framing, inspect the existing tracks and springs, and only then present a written price. Here’s what we handle under the installation umbrella, and what you can expect from Servo in each case.
New Door Installation
A new door installation is the full replacement: remove the old door, dispose of it, install the new panels, hardware, tracks, springs, and weatherseal, and test the balance and travel. You need this when the existing door is beyond repair, which we’ll show you with photos before we recommend it. Servo installs a new door with a documented photo record at the end, so you can see exactly what went in and how it was left.
Single Car Door
A single car door is typically 8 to 9 feet wide and runs $700 to $1,400 installed in Tempe, depending on material and insulation. These are common in older Tempe neighborhoods like Mitchell Park and Holdeman, where homes were built with single bays. We measure precisely, because a single door on an older frame often has settling that a new door needs to accommodate.
Double Car Door
A double car door, usually 16 feet wide, runs $1,200 to $2,200 installed for most Tempe homes. These doors carry more weight, which means the springs and opener need to be matched to the door, not just grabbed off a shelf. We spec the spring wire diameter, the track gauge, and the opener horsepower to the door, and we put it all in the written scope before starting.
Custom Garage Door
Custom doors cover anything outside standard sizing or design: full-view glass, carriage-house styling, unusual heights, or specific R-value insulation targets. Custom work in Tempe takes longer because the door is often built to order, and we’re upfront about the lead time. Servo photographs everything on the existing opening before ordering, so the fabricator gets exact measurements and you get exactly what you paid for.
Steel Doors
Steel doors are the most common installation we do in Tempe. They hold up to the sun and the occasional monsoon wind better than most materials, and modern steel doors come with decent insulation options for the garage. We install steel doors from Amarr, Clopay, and Wayne Dalton, and we’ll show you the gauge and insulation rating before you commit.
Wood Doors
Wood doors are less common in the desert for good reason: the heat and dryness can warp solid wood, and maintenance is ongoing. That said, some Tempe homeowners want the look, especially in neighborhoods like Maple-Ash and Daley Park where the homes have a mid-century or craftsman character. We install wood and wood-composite doors and we’ll tell you plainly what the maintenance picture looks like in this climate before you spend the money.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Garage Door Installation
We install and service all eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. For garages in Tempe, two brands show up more than most.
LiftMaster openers and doors are probably the most common in the East Valley. We carry their OEM parts in the truck, and we’ve installed enough of them to know the logic board revisions and rail systems across years. Raynor doors show up often in homes built in the 1990s and early 2000s around south Tempe, and we know their hardware and spring specs well. If you have a Craftsman door or opener, particularly one of the older chain-drive units, we can usually source exact-fit replacements. And if your door is something else entirely, we’ll still give you a written price and do the work the same way.
Whatever the brand, you get the same documentation: a photo record of what was there, what we did, and what you’re left with.
BeforeAfterSigns You Need Garage Door Installation Right Now
- Your door is sagging in the middle when you open it. A door that dips or bows under its own weight has structural fatigue, not a simple balance issue. In Tempe, the heat accelerates metal fatigue in older steel doors. A sagging door is a candidate for replacement, and continuing to run it puts strain on the opener and the springs.
- You can see daylight through the panels or around the edges. Visible gaps mean the weatherseal is gone or the panels have warped. That’s not just an energy problem; it’s an invitation for desert dust and pests. When the gaps are in the panels themselves, patching is temporary. Replacement is the real fix.
- Two or more panels are dented, cracked, or rusted through. A single damaged panel can sometimes be replaced. When two or more panels are failing, especially on a door that’s 15+ years old, the ROI on repair gets worse than replacement. We’ll replace panels when it makes sense and tell you when it doesn’t.
- The door makes a loud bang and then won’t open. That’s often a torsion spring snapping, which is dangerous and not a DIY job. The door is heavy; without a functioning spring, the opener can’t move it and the emergency release becomes a hazard. This is a repair-first situation, and we’d be out the same day. Call our 24/7 line: (602) 962-8352.
- You’ve had three or more repair calls on the same door in two years. At some point, the repair bills exceed the value of the door. We track what we find, with photos, so when the time comes to make that call, you have the documentation to make it with us or on your own.
Our Garage Door Installation Process - Step by Step
- 1
Measure and inspect. We measure the opening in three places, check the frame for square and level, and inspect the existing hardware. If the old door is still up, we photograph every component we plan to remove, including any damaged ones. Clause 4 of The Haven Standard means you see the failed part before anyone quotes a replacement.
- 2
Written quote with a flat price and scope. Before any work starts, you get a written scope of work and a flat price. No range, no “we’ll see when we get in there,” no surprise line items. The price is the price. This is Clause 1, and it’s never optional.
- 3
Removal and prep. We remove the old door, panels, hardware, and opener if it’s being replaced. We take the debris with us. If the frame needs shims or the mounting points need reinforcement, we handle that in this step, and it’s in the written scope before we start.
- 4
Installation and balancing. The new door goes in, section by section, with springs sized to the door’s exact weight. We set the travel limits, torque the hardware to spec, and test the balance in three positions. A door that isn’t balanced wears out springs and openers faster.
- 5
Photo documentation and walk-through. You get a documented photo record of the finished installation, and we walk you through what was installed, why, and what you should look for going forward. The warranty is in writing, not implied.
How Much Does Garage Door Installation Cost in Tempe?
Here are the ranges we see for Tempe installations:
| Service | Typical Cost in Tempe |
|---|---|
| New Door Installation | $700 - $2,200 |
| Single Car Door | $700 - $1,400 |
| Double Car Door | $1,200 - $2,200 |
| Opener Installation | $250 - $550 |
| Panel Replacement (per panel) | $250 - $500 |
| Spring Repair | $180 - $340 |
| Cable Repair | $130 - $250 |
| Track Realignment | $120 - $240 |
| Roller Replacement | $110 - $220 |
What moves the price in Tempe? The door material is the big one: a basic non-insulated steel single door sits at the bottom of the range, while an insulated steel or wood-looking composite double door sits at the top. The second factor is the opener: if you’re replacing an old chain-drive with a belt-drive LiftMaster, add $250-$550. Third, if your existing frame needs reframing or your spring system needs to be converted from extension to torsion, that adds labor and parts, and we’ll show you exactly what we found in the photos before we quote it.
You avoid overpaying by getting a written scope, not a verbal number. If a company won’t write it down, walk. You also avoid overpaying by checking whether the quote includes removal and disposal of the old door, the weatherseal, and the balance test. Ours does, every time, and it’s in the scope.
Every estimate from Servo is free. We’ll measure, inspect, and hand you a written price on the spot. If you have a written estimate from another company, bring it. We offer a free second opinion on any competing written estimate.
Garage Door Installation Near Tempe - Our Service Area
Servo Garage Doors Tempe installs doors across the East Valley. We’re in Guadalupe and Chandler weekly, and we serve Gilbert, Mesa, Sun Lakes, Paradise Valley, Phoenix, Glendale, Fountain Hills, Tolleson, and Queen Creek. If you’re farther out, call us: the dispatch depends on the day’s schedule and we’ll give you a straight answer.
For a deeper look at installation work in neighboring cities, see our pages on Garage Door Installation in Guadalupe and Garage Door Installation in Chandler. If you need repair rather than replacement, start at our home page for an overview of all services.
Serving Tempe, AZ - Our Local Coverage Area
We’re based in the Tempe area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Garage Door Installation in Tempe
Garage door installation is the process of removing an old door and installing a new one, including the panels, tracks, springs, hardware, weatherseal, and opener if needed. It’s more than swapping panels: the new door has to be balanced to its exact weight, and the springs and opener have to be sized to match. Servo Garage Doors Tempe handles the full installation with a written scope and a documented photo record.
Most standard installations take four to six hours from arrival to clean-up. Custom doors take longer because they’re built to order, and we’ll tell you the lead time up front. The installation itself is typically a single-day job, and we book the appointment around your schedule, not ours.
A new garage door in Tempe runs $700 to $2,200, depending on the door size, material, insulation, and whether you’re replacing the opener at the same time. The written quote you get from Servo is a flat price, not an estimate range. Call (602) 962-8352 for an exact quote, and the estimate is free.
Yes. We install and service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor garage doors and openers. For LiftMaster specifically, we carry OEM parts in the truck and know the opener revisions and rail systems across years. For Raynor, we’re familiar with the hardware and spring specs on doors installed in East Valley homes from the 1990s onward.
If your garage door is stuck open, stuck closed, or the spring has snapped, we answer the phone 24/7 at (602) 962-8352 and a live person handles the call. Emergency replacement is available same-day in most cases, but we won’t promise an installation time until we see what you have. We’ll give you a written price when we arrive, before any work starts.
Every installation is covered by the manufacturer’s warranty on the door and opener, plus our 365-Day Done Right Promise: if it’s not done right, we make it right. That promise is backed by The Haven Standard and written into the paperwork, not left to a handshake. You also get a documented photo record showing the completed installation.
Clear the area around the door on both the inside and outside: move cars, bikes, and anything stored near the tracks. Disconnect the opener from power if it’s being replaced. You don’t need to remove anything from the garage itself, but give the technician a clear working lane. We’ll handle the rest, including removal and disposal of the old door.
Schedule Your Garage Door Installation Service in Tempe Today
If your door is sagging, cracked, or just showing its age, call Servo Garage Doors Tempe at (602) 962-8352. We’ll measure, inspect, and hand you a written flat price before any work starts. Same-day installation is available in most Tempe neighborhoods, and our 24/7 line is answered by a person, not a recording. You’ll know the price, the scope, and what leaving looks like before the first panel comes off the truck.
Written by Marcus Deller, Owner at Servo Garage Doors Tempe, serving Tempe since 2015.