Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterCable Repair in Tempe, AZ
Garage door cable repair in Tempe typically costs between $150 and $280, depending on whether you need a standard cable replacement or a full drum and cable assembly. Because cables are under extreme tension and act as the primary safety mechanism preventing a door from falling, we always recommend having a trained professional handle the replacement. At Servo Garage Doors Tempe, we provide a flat, written price before we start any work, following Clause 1 of The Haven Standard. Learn more about How Much Does Garage Door Repair Cost? (2026 Price Guide) - Tempe, AZ. If your door is crooked, making a grinding noise, or refusing to lift, call (602) 962-8352 to have a technician inspect the system today.
When a cable snaps or frays, your garage door loses the counterweight balance it needs to operate safely. Many homeowners in Tempe neighborhoods like Alameda or near the Arizona State University campus notice the problem when the door hangs unevenly or jams in the tracks. Unlike other companies that might push for a full door replacement, we focus on diagnosing the specific failure-whether it’s a frayed wire, a damaged drum, or a misaligned cable-and providing a transparent, written scope of the repair. This is part of our broader Garage Door Repair in Tempe services, where we prioritize clear communication and evidence-based work.
When You Need Cable Repair
Garage door cables are high-tension components that endure significant stress every time you open or close your door. In the dry, hot climate of Tempe, cables can sometimes wear faster due to dust accumulation or simple fatigue after years of use. Watch for these specific symptoms that indicate your cables need professional attention:
- The door hangs crooked: If one side of the door appears to be lower than the other when closed, the cable on the lower side has likely snapped or slipped off the drum. This creates an immediate safety risk as the door is no longer balanced.
- The door won’t open: If you press the button on your LiftMaster or Chamberlain opener and the motor hums but the door doesn’t budge, a snapped cable may have engaged the safety sensors or caused the door to jam in the track.
- Visible fraying: If you look at the cables running along the side of your door and see individual strands of wire unraveling or “bird-caging,” the cable is compromised and will fail soon. Do not attempt to touch or tighten these yourself.
- Loud grinding or popping noises: A cable that has jumped off its drum will often rub against the track or bracket, creating a distinct metallic grinding sound. If you hear a loud “pop” followed by the door going crooked, the cable has likely snapped.
- The door feels heavy or uneven: If you disconnect the opener and try to lift the door by hand, it should move with relatively little effort. If it feels extremely heavy or requires two people to move, your cable and spring system is failing to support the weight properly.
If you notice any of these signs, stop using the door immediately. Continued operation can damage the tracks, bend the bottom brackets, or break the garage door opener itself. Call (602) 962-8352 to have a technician arrive, inspect the assembly, and provide a written price before any repairs occur.
Our Cable Repair Process
We operate under The Haven Standard, which dictates that the customer must see the failed component before any work is quoted or performed. Our repair process is designed to be transparent, ensuring you know exactly what is happening with your door before we touch a tool.
- Assessment and Evidence: Our technician arrives and inspects the cable system. Following Clause 4 of The Haven Standard, we photograph the failed cable, the damaged drum, or the worn-out bracket to show you exactly why the system failed.
- Written Scope and Price: Before we begin, we provide a flat, written price and a clear scope of work. You will know exactly what you are paying for, and we do not perform “surprise” repairs once we are on-site.
- Safety Securing: Because we work with high-tension springs and cables, we secure the door in a safe, locked-out position to prevent accidental movement. This is critical for any Craftsman or Raynor system we service.
- Component Replacement: We remove the damaged cables and replace them with high-cycle, galvanized steel cables rated for the specific weight of your garage door. We also inspect the cable drums for wear, as damaged grooves can cause new cables to fail prematurely.
- System Calibration: After installation, we balance the door and test the limits on your opener. We ensure the door travels smoothly and stops exactly where it should, without slamming or stalling.
- Documentation: We provide you with a documented record of the work completed. This is your proof of service and is backed by our 365-Day Done Right Promise.
BeforeAfterCable Repair Pricing in Tempe
We believe in upfront pricing. We do not use “call for a quote” as a tactic to get our foot in the door; we provide honest, market-appropriate pricing for residents of Tempe. The cost of cable repair depends on the type of door you have and whether the drums or brackets were damaged when the cable failed.
| Service Item | Price Range |
|---|---|
| Standard Cable Replacement (Pair) | $150 - $220 |
| Cable and Drum Assembly Replacement | $200 - $280 |
| Emergency Service Fee (Outside Standard Hours) | $75 |
If you have a written estimate from another company, we offer a Free Second Opinion. Bring the paperwork, and we will review the scope of the recommended work at no cost to you. We regularly see garage door systems in Tempe that have been misdiagnosed, and we are happy to provide an objective assessment through Garage Door Repair Near Me in Tempe, AZ. Call (602) 962-8352 for an exact quote - estimates are free.
FAQs - Cable Repair
How do I know if my garage door cable is broken?
You will typically see the door hanging at an angle or notice it is stuck in the track when you try to open it. If you look at the sides of the door, you may see a cable hanging loose or appearing frayed, which confirms the component has failed.
Can I replace the garage door cables myself?
No, you should not attempt this. Garage door cables are attached to springs that are under immense tension, and a mistake can result in the door falling or the spring snapping, which causes serious injury. Always call a professional to manage high-tension repairs with our our Garage Door Repair services.
Do you service all brands of garage doors?
Yes, we service all eight major brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Whether your door is a newer model or an older system, we carry the parts necessary to get it running properly.
How long does a cable repair take?
Most cable replacements are completed in about 60 to 90 minutes. Because we carry a standard inventory of parts for common door sizes, we can often complete the repair on the same day you call us.
If your garage door is acting up, don’t force it. Forcing a door with a snapped cable can cause a chain reaction of damage to your tracks, opener, and rollers, sometimes requiring Panel Replacement. We are ready to help with transparent, evidence-based service in Tempe. Call (602) 962-8352 today for a free estimate and get your door back to normal.
Written by Marcus Deller, Owner at Servo Garage Doors Tempe, serving Tempe.