Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterTrusted Garage Door Parts for Tempe Homeowners
When a garage door part fails in Tempe, it usually announces itself: a torsion spring snaps with a sound like a gunshot from the garage, a frayed cable leaves the door hanging crooked in its tracks, or a worn bottom seal lets monsoon dust and June heat pour in under the door. For the most part, the fix is straightforward and our Garage Door Parts in Tempe are on our truck. Servo Garage Doors has made more than 18,000 garage doors right since 2015, and every parts job starts the same way: a flat, written price and written scope before any work begins, per Clause 1 of The Haven Standard. If you’re dealing with a broken part in Tempe right now, call (602) 962-8352 and a real person answers, 24/7, including holidays.
What sets our parts service apart is the paper trail. We photograph the failed component before quoting a replacement, so you see exactly what we saw and why the part is being replaced. That’s Clause 4 of The Haven Standard and it’s been the way Servo has worked since day one.
What Our Garage Door Parts Service Includes
Garage door parts are not all the same. Some are wear items that fail on a predictable schedule in the Tempe climate. Others fail suddenly and stop the door from operating altogether. Each repair below includes the part, the labor, a written scope, and a documented photo record of what was found and what was done. We also include a home walkthrough of the full door system while we’re there, because a worn hinge and a broken spring often happen together.
Torsion Spring
The torsion spring is the counterweight system mounted above the closed door. It stores the mechanical energy that makes a 150-pound door feel light when you lift it. In Tempe, the heat accelerates metal fatigue, and a torsion spring that breaks after 10,000 cycles is doing exactly what it was designed to do when it was installed. We measure the wire diameter, inner diameter, and length of the old spring before quoting a replacement, so the new spring is matched to the door’s weight and balance, not guessed. Torsion spring replacement in Tempe typically runs $180 to $340, and this is a repair we recommend leaving to a trained technician. The spring is under enough tension to cause serious injury if it releases incorrectly.
Extension Spring
Extension springs are the older counterweight design found on many Tempe homes built before 2005. They run along the horizontal tracks on either side of the door and stretch as the door closes. When an extension spring fails, it usually breaks at the hook end or loses its stretch over time, which makes the door feel heavy at the bottom of its travel. We replace extension springs in matched pairs, install safety cables through the spring as standard, and set the door’s balance before we leave. The goal is a door that stays wherever you put it, not one that drifts up or slams down.
Cables & Drums
Cables are the braided steel lines that connect the spring system to the bottom brackets of the door. They wind onto cable drums at the top of the shaft. When a cable frays or snaps, the door typically jams in the track or hangs visibly uneven. In Tempe, we regularly see cable failures in Garland, Clark Park, and Lindon Park on doors where the track was never adjusted after the house settled, though we also stock Garage Door Parts - Mesa for homes just east of our core service area. We replace cables in matched pairs, inspect the drums for grooves and wear, and adjust the track before re-tensioning. Cable repair runs $130 to $250 depending on the door and how far the drum has to be repositioned.
Rollers & Hinges
Rollers are the wheels that carry the door through the track. Most builders install plastic rollers, and the nylon coating or the bearing inside wears out, making the door rattle and stutter on the way up. Hinges connect the door panels and flex every time the door opens. A hinge with a loose rivet lets the panel twist, which accelerates roller wear and strains the opener. We replace rollers in full sets of 10 to 12 and upgrade to sealed-bearing nylon rollers as a standard recommendation. Roller replacement runs $110 to $220, and our technicians check every hinge on the door as part of that job.
Weatherstripping
Weatherstripping is the vinyl or rubber gasket on the sides and top of the door opening. It’s what keeps the garage from turning into an oven. In Tempe, UV exposure bakes the vinyl until it’s brittle and cracked, and once the seal fails, dust, monsoon rain, and heat get in along the jamb. We inspect the aluminum retainer, replace the insert, and seal the corners. This is one of the lowest-cost repairs on a garage door, and one of the ones most often missed by seasonal service checks. Weatherstripping is replaced during the visit and the old strip comes back with us.
Bottom Seal
The bottom seal is the rubber strip on the bottom of the door itself. It compresses against the concrete slab when the door closes. On Tempe slabs, it wears unevenly because the concrete shifts with the soil, and we often see doors where one corner of the bottom seal is flattened and the other still holds its shape. We cut a new seal to the door’s exact width, pull it through the aluminum channel, and check the gap along the full width while the door is closed. It’s a small part with a large effect on the energy bill, and it’s typically replaced in under an hour.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Garage Door Parts
We stock Chandler Garage Door Parts and carry inventory for all eight major garage door brands we service: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. If you have a Wayne Dalton door, you already know the brand uses its own spring system, and that generic parts are a poor fit for the torque specs. We carry the correct Wayne Dalton spring and drum hardware, and our technicians recognize the brand’s TorqueMaster and standard torsion setups on sight. The same goes for Raynor, where the door weight and track profile vary enough from model to model that matching the part to the door matters more than matching it to the label.
We’ve serviced hundreds of Craftsman openers over the years and carry the brand’s drive gears, sprockets, and wall controls on the truck. LiftMaster parts, including logic boards, safety sensors, and trolley carriages, are the most commonly stocked parts in our Tempe inventory because the brand appears on so many homes from the 2015-to-2025 build cycle. Whether you have one of those makes or any other, we can help. If the part is not on the truck, we order it and return with a written price and a scheduled time, no surprises between the quote and the invoice.
BeforeAfterSigns You Need Garage Door Parts Right Now
- The door opens a few inches, stops, and reverses. This is often a broken torsion spring or a misaligned safety sensor. The door’s logic board sees an obstruction and acts to prevent damage or injury. It’s not a problem that clears up on its own, and the longer the door sits partially open, the greater the strain on the opener and cables.
- A loud snap comes from the garage, followed by the door not opening at all. That’s the sound of a torsion spring releasing its stored tension. The spring has fully failed, and the door’s full weight is now sitting on the opener and cables. It is the single most common parts call we take in Tempe, and it’s a repair we do same-day, year-round.
- The door is visibly crooked or tilted in the tracks. A door that hangs unevenly is a door with a cable problem, a broken spring on one side, or a track that has pulled away from the wall. Operating the door in this state can pull a panel out of the track entirely. The door needs a technician, and the door should be left alone until one arrives.
- The garage is hot, dusty, or shows a line of daylight under the door. That daylight is the bottom seal or weatherstripping failing. It’s not cosmetic. Heat gain and dust entry are the direct symptoms, and in Tempe they make the garage unusable as a workspace or storage space for much of the year. This is a quick, low-cost fix once we’re out.
- The door shudders, rattles, or sounds like steel grinding on steel. The rollers or their bearings are worn. Every cycle grinds the roller thinner and transfers more vibration into the hinges and opener. It is a wear part doing what wear parts do. Swapping them before the door eats a panel is the economical route. We provide a Garage Door Parts in Tempe assessment with every repair so the next failure is caught before it becomes the next emergency.
Our Garage Door Parts Process - Step by Step
- 1
You call, a person answers. When you call (602) 962-8352, you speak to a live person, not a phone tree. We ask what the door is doing, what you heard or saw, and when it started. We use that information to stage the right parts on the truck before dispatch, which is why most parts jobs are completed on the first visit.
- 2
The technician arrives and documents the door. Every Servo technician photographs the failed part before touching anything: the broken spring, the frayed cable, the worn roller sitting flat in the track. That photo record is part of Clause 4 of The Haven Standard, and you receive a copy. It is your evidence of what was actually wrong, not a verbal description from memory.
- 3
You get a flat, written price before any work starts. We write the scope and the dollar figure on paper, including the part, the labor, and any related small parts. You sign it or you don’t. There is no pressure, no ‘call for a quote’ runaround, and the price on that sheet is the price on the invoice. Clause 1 of The Haven Standard, every job, no exceptions.
- 4
We repair the door and test the full system. The part is replaced, and then the door is cycled repeatedly. We check the balance at mid-travel, run the opener through its travel limits, and adjust the safety reversal. The goal is a door that opens and closes like it did when it was installed, not just a door that technically works again.
- 5
You get the record and the warranty. When the tech leaves, you have the photo record, the written scope with the flat price, and the 365-Day Done Right Promise in writing. If the repair is not right, we make it right. That promise is backed by a terms page, not a handshake, and it’s part of the standard every Servo tech works to.
How Much Does Garage Door Parts Cost in Tempe?
Garage door parts pricing in Tempe is predictable if you know the part. A torsion spring runs $180 to $340. A cable repair runs $130 to $250. Roller replacement runs $110 to $220. Track realignment, which often rides along with a cable or roller job, runs $120 to $240. New door installation runs $700 to $2,200 if the damage is beyond a parts repair. The numbers vary based on the door’s weight, the brand of hardware, and whether the failure damaged anything around it. A broken spring, for example, can bend a lower panel or yank a cable off its drum, which adds to the scope.
Two things affect your final price more than anything else. The first is whether the door is inspected before it fails. A $15 roller left too long becomes a $250 panel replacement. The second is match quality. Doors are balanced by weight, not by brand logo, and a spring that’s been guessed at rather than measured fails early and hard. That’s why every Servo quote starts with measurements and a photo record. The estimate is free, and the price is in writing before you commit to anything. If you have an estimate from another company, bring it and we’ll give you a free second opinion on the paperwork, no coupon or code required.
Garage Door Parts Near Tempe - Our Service Area
We run parts calls all over Tempe, from the original neighborhoods near Clark Park and Hudson Manor out to new construction along the 101. Beyond Tempe, we carry Garage Door Parts in Guadalupe stock for that community’s older door styles, and we handle Garage Door Parts in Chandler for the Sun Lakes corridor. Most parts calls in Tempe are reached within the hour, and same-day service is standard. We also cover Gilbert, Mesa, Paradise Valley, and the surrounding East Valley, with emergency parts calls answered by a live person around the clock.
Serving Tempe, AZ - Our Local Coverage Area
We’re based in the Tempe area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Garage Door Parts in Tempe
Garage door parts service is the replacement or repair of the individual mechanical components that make your door open and close: springs, cables, drums, rollers, hinges, weatherstripping, and the bottom seal. Servo Garage Doors Tempe identifies the failed part, photographs it, quotes the replacement in writing, and completes the repair on-site, and our Gilbert Garage Door Parts service operates the same way for neighboring communities. The service always includes a check of the full door system so a second failing part does not become next week’s emergency.
Most single-part repairs are completed in 30 to 90 minutes. A torsion spring replacement typically takes under an hour, and a bottom seal or weatherstripping replacement is often done in 30 minutes. The main variable is the age and condition of the surrounding hardware. If a cable has frayed into a drum or a hinge has wallowed out a panel, the job expands and the written scope reflects that before we start.
A typical parts repair in Tempe runs between $110 and $340 depending on the part. Roller replacement runs $110 to $220, cable repair $130 to $250, and torsion spring replacement $180 to $340. You will always receive a flat, written price with a written scope before any work begins, per Clause 1 of The Haven Standard. The price on the sheet is the price you pay. Call (602) 962-8352 for an exact quote, and the estimate is free.
Yes. LiftMaster is one of the brands we service most often in Tempe, and we stock the brand’s logic boards, safety sensors, trolley carriages, and drive gears on the truck. We also carry parts for Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. If the part is not on the truck, we order it and return with a scheduled time and a written price, so the quote and the invoice match.
Yes. Emergency garage door parts calls are answered by a live person 24 hours a day, 7 days a week, including holidays. If a spring has snapped and your car is trapped in the garage or the door won’t close and secure the house, call (602) 962-8352 and a named technician is dispatched with an on-the-way text, not a callback window. Most emergency parts calls in Tempe are reached the same day.
Yes. Every parts repair is covered by the 365-Day Done Right Promise: if the repair is not right, we make it right. The promise is documented in writing, backed by The Haven Standard and a terms page, not a handshake. You also receive a written scope and a documented photo record on every visit, so there is a paper trail showing the part that failed, the part that went in, and the work that was done.
Clear two feet of space along each side of the door and leave the door closed. If the door is stuck open, leave it open and tell us when you call; we’ll plan for it. If you have an estimate from another company, have the paperwork ready and we’ll provide a free second opinion. Nothing else is needed. We’ll photograph the failed part, write the scope, and quote the price before any work begins, on every job.
Schedule Your Garage Door Parts Service in Tempe Today
If a part has failed, call (602) 962-8352. You’ll speak to a live person, get a flat written price before any work starts, and receive a photo record of the part that failed and the part that replaced it. It’s the evidence-first way we’ve worked since 2015, and it’s the reason 18,000+ doors made right all carry a paper trail. If it’s urgent, we answer the phone now, 24/7, including holidays.
Written by Marcus Deller, Owner at Servo Garage Doors Tempe, serving Tempe since 2015.